Scrustie
Moderator: Moderators
Re: Scrustie
Jeeej stapje dichterbij
- Bijlagen
-
- P1070872.JPG (2.41 MiB) 16911 keer bekeken
-
- P1070871.JPG (1.5 MiB) 16911 keer bekeken
-
- P1070870.JPG (2.42 MiB) 16911 keer bekeken
Ik kan vanalles en nog wat maar niets te goei, klinkt bekent??
Team CAD (Copy Adjust Destroy)
Team CAD (Copy Adjust Destroy)
Re: Scrustie
Man, da's een look op zichzelf.
Maar zou je niet proberen voor grotere wielen nu?
Maar zou je niet proberen voor grotere wielen nu?
Beter nu creperen, dan in de wars repareren.
Re: Scrustie
Misschien maar ik zou voor de rechter velg wel een nieuwe willen zit een gat in
De bouten bovenaan worden nog vervangen door kleintjes (blijven M12) maar zoals ik al eens eerder zei ben ik bang voor het gewicht, weegt een pak meer dan Kashei
De bouten bovenaan worden nog vervangen door kleintjes (blijven M12) maar zoals ik al eens eerder zei ben ik bang voor het gewicht, weegt een pak meer dan Kashei
Ik kan vanalles en nog wat maar niets te goei, klinkt bekent??
Team CAD (Copy Adjust Destroy)
Team CAD (Copy Adjust Destroy)
Re: Scrustie
Nieuwe wielen is geen probleem, we zijn ondertussen een paar generaties verder.
En vergelijken met de lichte Kashei, die geen 12.5kg op de weegschaal zet da's minder dan optimaal.
En vergelijken met de lichte Kashei, die geen 12.5kg op de weegschaal zet da's minder dan optimaal.
Beter nu creperen, dan in de wars repareren.
Re: Scrustie
Juist RC wielen als je zegt de welke dat je zoal gebruikt dan kan ik eens rond kijken (eventueel met buddy code als je die nog hebt)
Ik kan vanalles en nog wat maar niets te goei, klinkt bekent??
Team CAD (Copy Adjust Destroy)
Team CAD (Copy Adjust Destroy)
Re: Scrustie
We kopen de meeste wielen bij Conrad.
En de setup die jij hebt leent zich er niet zo gemakkelijk toe.
En de setup die jij hebt leent zich er niet zo gemakkelijk toe.
Beter nu creperen, dan in de wars repareren.
Re: Scrustie
For your information: This LED is not really a error LED of the software, it is a hint for calibration the transmitter.Ik moet echt de handleiding van de 4_5 Esc doornemen want de error led pinkt
Background: When using the internal cross-mixing of the controller, it is necessary to set the stick of the controller "central".
Fail example: You have set the stick a little bit "left" of center. Therefore the controller for left/right means a little curve to the left, the right motor gets a little power. But the threshold (have a look on the motor-power-line) is not passed. => No reaction of the bot. => Ok
When you put the stick a little bit forward to move the bot, the power is set to both motors. But the right motor gets a little bit more power than the left motor. => At starting, the bot is doing a littel curve to the left.
An now, the yellow LED on the controller is needed: When the stick of the transmitter is exact centered, the LED did not blink.
When the input-channel 1 (for left/right) of the ESC is a little outside the center, the LED blinks one time.
When the input-channel 2 (for speed) of the ESC is a little outside the center, the LED blinks two times.
When the LED blinks three times, both channels are not centered.
This LED is a service to the roboteer, to "calibrate" the stick of the transmitter correct in centered position.
corresponding
In princip, you can use a 40A fuse . But with the FK1-case, not available. => Prepare a fuse holder for the FKS-case and connect it to the FK1-case. => The MOSFET-halfbridges are made for 40A.30A fuse is electrofused
Only problem for you: You will need a little more "area" in the bot.
Re: Scrustie
Juist terug van een nieuwe test sessie, veel meer tractie en controleerbaarheid maar de wielen zijn kut, dus nu gaat er een bestelling weg voor nieuwe wieltjes
Ik kan vanalles en nog wat maar niets te goei, klinkt bekent??
Team CAD (Copy Adjust Destroy)
Team CAD (Copy Adjust Destroy)
Re: Scrustie
Jeej wielen, deze had ik nog liggen van den Action.
Heb alleen het probleem dat mijn 30A zekering blijft springen dat word dus de esc aanpassen zodoende dat die minder springt
Ow en heb een weegschaal gekocht en Scrustie zit op 13.5kg +-0.1Lets try that shall we and on a second measuring I've got place for the XL version.IBF schreef:For your information: This LED is not really a error LED of the software, it is a hint for calibration the transmitter.Ik moet echt de handleiding van de 4_5 Esc doornemen want de error led pinkt
Background: When using the internal cross-mixing of the controller, it is necessary to set the stick of the controller "central".
Fail example: You have set the stick a little bit "left" of center. Therefore the controller for left/right means a little curve to the left, the right motor gets a little power. But the threshold (have a look on the motor-power-line) is not passed. => No reaction of the bot. => Ok
When you put the stick a little bit forward to move the bot, the power is set to both motors. But the right motor gets a little bit more power than the left motor. => At starting, the bot is doing a littel curve to the left.
An now, the yellow LED on the controller is needed: When the stick of the transmitter is exact centered, the LED did not blink.
When the input-channel 1 (for left/right) of the ESC is a little outside the center, the LED blinks one time.
When the input-channel 2 (for speed) of the ESC is a little outside the center, the LED blinks two times.
When the LED blinks three times, both channels are not centered.
This LED is a service to the roboteer, to "calibrate" the stick of the transmitter correct in centered position.
correspondingIn princip, you can use a 40A fuse . But with the FK1-case, not available. => Prepare a fuse holder for the FKS-case and connect it to the FK1-case. => The MOSFET-halfbridges are made for 40A.30A fuse is electrofused
Only problem for you: You will need a little more "area" in the bot.
Ik kan vanalles en nog wat maar niets te goei, klinkt bekent??
Team CAD (Copy Adjust Destroy)
Team CAD (Copy Adjust Destroy)
Re: Scrustie
Jee ik kon eindelijk mijn batterij oprijden en dat duurde niet lang
Filmpje:
Filmpje:
- Bijlagen
-
- P1070881.JPG (1.17 MiB) 16739 keer bekeken
-
- P1070880.JPG (1.16 MiB) 16739 keer bekeken
Ik kan vanalles en nog wat maar niets te goei, klinkt bekent??
Team CAD (Copy Adjust Destroy)
Team CAD (Copy Adjust Destroy)
Re: Scrustie
Lets try that shall we and on a second measuring I've got place for the XL version.
I have seen, that you have set two fuse-holder parallel. (correct seen?) . The yellow fuses are normally for 20A.
In my opinion, 2 fuses with 20A don't mean real 40A. => Like in the real life: One is the jackass, who has to work more like the other....
(Or like in the cowboy-filmes: Two horses are not running in double speed like one horse. )
If you have the "area" in the bot, replace the new fuse-holder to a FK1-fuse-holder. In this case, it is possible to use the orange fuses (40A).
https://www.buerklin.com/de/kfz-sicheru ... r/p/46g720
for this fuse-type:
https://www.buerklin.com/de/kfz-flachsicherung/p/42g942
You are in Gent next weekend? I will bring you such a fuse-holder .
As you are able to sold on boards, to your information: This board of the ESC is made for two types of fuse-holder: FKS (like you got) and FK1 (see above). The only problem is: The fuse-holder for FK1 needs more space in high dimension. If enough space, you can replace the fuse-holder directly on the board.
Best regards
Reiner
Re: Scrustie
yes that's correct, I doubled them like they do in most car amplifiers.
Can you bring a upgrade kit to go from standard to xl, I think I got the room for it I've got my soldering iron/desolderpump/solder packed.
Can you bring a upgrade kit to go from standard to xl, I think I got the room for it I've got my soldering iron/desolderpump/solder packed.
Ik kan vanalles en nog wat maar niets te goei, klinkt bekent??
Team CAD (Copy Adjust Destroy)
Team CAD (Copy Adjust Destroy)
Re: Scrustie
Overlevingen van zaterdag:
1. zekeringen van de esc erdoor, zekering vervangen door een 40A
2. buiten de arena gewipt
3. wiel vast, dus kon alleen maar rondjes draaien
4. forfait wiel vast????
Ben eens benieuwd voor vandaag.
1. zekeringen van de esc erdoor, zekering vervangen door een 40A
2. buiten de arena gewipt
3. wiel vast, dus kon alleen maar rondjes draaien
4. forfait wiel vast????
Ben eens benieuwd voor vandaag.
Ik kan vanalles en nog wat maar niets te goei, klinkt bekent??
Team CAD (Copy Adjust Destroy)
Team CAD (Copy Adjust Destroy)
Re: Scrustie
Deze morgend aangekomen en eens het wiel bekeken, het is erger het verhaal:
> Wiel gemonteerd en uitlijningsgaten (waar de vijzen doorgaat zodoende dat het wiel vast zit op het tandwiel) in de hdpe groter geboord zodoende date er meer spel is.
> Nope loopt nog altijd ergens aan
> wiel er terug af gedaan en zo alleen nog maar tandwiel op tandwiel overhouden
> Nope loopt nog altijd aan, maar wel altijd op dezelfde plek (voel je de bui al hangen)
> groot tandwiel eraf en draaien aan het tandwiel van de motor en ja hoor motor slag gehad en dus ergens binnenin iets scheef getrokken
Had ik het zaterdag geweten dan had ik nog aan Mario kunnen vragen om reserve motoren mee te brengen.
Swat was een leuke dag met leuke en minder leuke gevechten (pusher op pusher vind ik maar niets en meestal het publiek ook niet).
> Wiel gemonteerd en uitlijningsgaten (waar de vijzen doorgaat zodoende dat het wiel vast zit op het tandwiel) in de hdpe groter geboord zodoende date er meer spel is.
> Nope loopt nog altijd ergens aan
> wiel er terug af gedaan en zo alleen nog maar tandwiel op tandwiel overhouden
> Nope loopt nog altijd aan, maar wel altijd op dezelfde plek (voel je de bui al hangen)
> groot tandwiel eraf en draaien aan het tandwiel van de motor en ja hoor motor slag gehad en dus ergens binnenin iets scheef getrokken
Had ik het zaterdag geweten dan had ik nog aan Mario kunnen vragen om reserve motoren mee te brengen.
Swat was een leuke dag met leuke en minder leuke gevechten (pusher op pusher vind ik maar niets en meestal het publiek ook niet).
Ik kan vanalles en nog wat maar niets te goei, klinkt bekent??
Team CAD (Copy Adjust Destroy)
Team CAD (Copy Adjust Destroy)
Re: Scrustie
Botsen met HDPE raptors is het niet, nee. geen goed geluid uit te krijgen dan...
Niels Schotten
DRG Arena marshall & Judge
"Hard Work Often Pays Off After Time, but Laziness Always Pays Off Now."
Every once in a while you need to take your foot out of your mouth and up against your rear to kick our ass in to gear...
DRG Arena marshall & Judge
"Hard Work Often Pays Off After Time, but Laziness Always Pays Off Now."
Every once in a while you need to take your foot out of your mouth and up against your rear to kick our ass in to gear...