Post
by flex » Thu Nov 27, 2014 8:14 pm
2.1, eerste zin.
While powering on the device press down and hold the program button for 7 seconds, during this time the LED will stay on.
3.4
STICK IS UP HIT!
Relay 1 pulses open for 0.5 seconds, then closes. After that relay 2 will open for 0.75 seconds. If the stick is still in the up position after 1.5 seconds, relay 2 will open again for as long as the stick is in the up position. ( maybe the axe is stuck and it needs extra force)
STICK IS DOWN, SRIMEC MODE
Relay 1 pulses open for 1 seconds, then closes. After that relay 2 will open for 0.75 seconds. If the stick is still in the down position after 1.75 seconds, relay 1 will open again for as long as the stick is in the down position. ( maybe the robot needs extra srimec power.) After the stick is returned to the middle position relay 2 will open for 0.75 seconds.
Niels Schotten
DRG Arena marshall & Judge
"Hard Work Often Pays Off After Time, but Laziness Always Pays Off Now."
Every once in a while you need to take your foot out of your mouth and up against your rear to kick our ass in to gear...